Description
"Built to provide a combination of performance and portability for cutting in-ground utility pipe, the 680ES-PG petrol powered utility chain saw with PowerGrit chain will change the way to cut pipe. This affordably priced petrol powered saw, allows you to cut up to 10" deep from one side into ductile iron, cast iron, PVC, HDPE and Insituform lining and is also designed to run the full line of MAX series chains. With a quick switch of guidebar, chain and drive sprocket, you have the ability to use this saw in masonry, stone and even reinforced concrete. Making it the most cost effective, versatile tool in your arsenal."
- Polyester air filter designed specifically for wet cutting
- Operates PowerGrit Utility saw chain
- Multifunction lever controls choke, throttle advance, run and stop modes
- Extended drive sprocket adapter offers easy chain assembly
- Deep cutting solution for obstructed or small openings
- Easy-to-start in all weather
California requires the following notice: WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit the California Proposition 65 website
| Engine Type | 2-stroke, Air Cooled |
| Displacement | 76.5 cc (4.7 cu-in) |
| Horsepower | 3.7 kW (5 hp) @ 9,500 rpm |
| Torque | 4.1 Nm (36.3 in-lbs) @ 6,500 rpm |
| Engine Speed | 11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle) |
| Chain Speed at Maximum Power | 34.5 m/s (6800 ft /min) |
| Weight | 9.5 kg (21 lbs) powerhead only |
| Dimensions | 46 cm (18 in) length / 29 cm (11.5 in) height / 25 cm (10 in) width |
| Starter | Dust and water resistant |
| Ignition | Special water resistant electronic ignition |
| Fuel ratio | 2% (50:1) gasoline-to-oil |
| Fuel Capacity | 0.88 liter (0.23 gallon) |
| Water Supply Requirement | Minimum: 1.5 bar (20 psi) |
| Water Flow Requirement | Minimum: 4 lpm (1 gpm) |
| Guaranteed Sound Power Level, Lwa (1) | 117 dB(A) (Kwa=3.0 dB(A)) |
| Equivalent Sound Pressure at the Operator's Ear Lwa | 101.0 dB(A) (K = 2.0 dB(A)) |
| Vibration, ahv eq Concrete Cutting (2) | 7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle |
| Downloads | Datasheet |
| Downloads | Replacement Parts List |
| Downloads | Operator Manual |
| Downloads | ICS Product Catalog |
Related Products
Related Products
680ES Gas Power Cutter
ICS
ICS 695XL GC Gas Power Concrete Chain Saw
ICS
14" K970 Ring Husqvarna Gas Powered Saw
Husqvarna
9" K760 Cut-N-Break Husqvarna Power Cutter Saw
Husqvarna
14” Masonry Gas Saw
Sencore
16" K970 Husqvarna Cut-Off Saw
Husqvarna
14" K970 Husqvarna Cut-Off Saw
Husqvarna
14" K970 Fire Rescue Power Cutter Saw
Husqvarna