null
ICS

680ES Gas Power Cutter

(No reviews yet) Write a Review
SKU:
ICS 576153
$2,236.00
Frequently bought together:

Description

Deep Cutting, Gas Power Cutter

Built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value. Easy to start with a new multifunction lever to control choke, run, and stop functions. The distinctive black powerhead houses specially designed carburetion and ignition systems that work together to ensure easy starting, cooler operation and dependable performance at just about any elevation. Available with 12-inch (30 cm) and 14-inch (35 cm) guidebars and the entire line of FORCE3 series diamond chain. Package includes 680ES GC powerhead, 14" guidebar and 14" FORCE3 Standard chain

  • Polyester air filter designed specifically for wet cutting
  • Operates FORCE3 bar and chain consumables up to 14 inches(35cm)
  • Multifunction lever controls choke, throttle advance, run and stop modes
  • Extended drive sprocket adapter offers easy chain assembly
  • Deep cutting solution for obstructed or small openings
  • Cut squares as small as 4 inchesン x 4 inches (10 cm x 10 cm)
  • Easy-to-start in all weather

California requires the following notice: WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit the California Proposition 65 website

 

Engine Type 2-stroke, Air Cooled
Displacement 76.5 cc (4.7 cu-in)
Horsepower 3.7 kW (5 hp) @ 9,500 rpm
Torque 4.1 Nm (36.3 in-lbs) @ 6,500 rpm
Engine Speed 11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle)
Chain Speed at Maximum Power 34.5 m/s (6800 ft /min)
Weight 9.5 kg (21 lbs) powerhead only
Dimensions 46 cm (18 in) length / 29 cm (11.5 in) height / 25 cm (10 in) width
Starter Dust and water resistant
Ignition Special water resistant electronic ignition
Fuel ratio 2% (50:1) gasoline-to-oil
Fuel Capacity 0.88 liter (0.23 gallon)
Water Supply Requirement Minimum: 1.5 bar (20 psi)
Water Flow Requirement Minimum: 4 lpm (1 gpm)
Guaranteed Sound Power Level, Lwa (1) 117 dB(A) (Kwa=3.0 dB(A))
Equivalent Sound Pressure at the Operator's Ear Lwa 101.0 dB(A) (K = 2.0 dB(A))
Vibration, ahv eq Concrete Cutting (2) 7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle
Downloads Datasheet
Downloads Replacement Parts List
Downloads Operator Manual
Downloads ICS Product Catalog
View AllClose